CATIA – Core & Cavity Design 2 (CCV) allows rapid and cost effective design of the core and cavity used in mold tooling or manufacturing equipments. Core and Cavity Design: General Process Parting Line-Split. 15 You will discover CATIA V5 Core & Cavity Design user interface and you will. Prepare cash flow and profit & loss forecasts. • Get backers to invest. Plan. 25YEARS. THE LEADING. BUSINESS PLAN. BO.
|Published (Last):||24 November 2006|
|PDF File Size:||17.68 Mb|
|ePub File Size:||2.28 Mb|
|Price:||Free* [*Free Regsitration Required]|
Such a body must be named Pocket, e. The coolant channel definition dialog box and a cylindrical hole are displayed in the viewer. In this case, before inserting the screws, you must define the sub-product e.
When the Component is inserted in the Mold, the DrillHole is automatically subtracted creation of Remove or Assemble features from all affected elements. CavitySurfaceif present in the Molded Part. You can explicitly select an element in the specification tree as Father Product to override the default or automatic values. It may consist of any sequence of features like Pads, Shafts, etc. Learn more cagity Amazon Prime.
CATIA – Core & Cavity Design 2 (CCV)
Prior to reading deesign Mold Tooling Design User’s Guide, you are recommended to have a look at the Infrastructure User’s Guide for information on the generic capabilities common to all products. Scroll down to line 37 and double click on the reference N in the table push the Table button to display the table.
Activate Diameter and set required value. Click the Scaling icon. The rule will be inserted in the component created in the Mold or Die. This sketch will be the guide Layout along which a profile Section is swept to create the runner.
A Receiving body can be located in the Part at the same level as the PartBody, or as a sub-body through an Assemble operation. Standard catalog components available in TG1 such as: Here is the final result: It is recommended that the user defines the following elements in the Molded Part, in Geometrical set called PartingBody: A Product corresponding to the Mold tool assembly which contains the Mold Base plates.
How to do the Core & Cavity extraction Catia V5
Body Pad can contain any positive-polarity feature Pad, Shaft. On which side of this plate top or bottom it should be positioned by default. Such a body must be caivty Pad, e. The Mold Base preview will be automatically updated.
Double click on MoldedPart in the specification tree. This is the part to be molded:.
Tutorial – Catia – Mold – Catia V5 R15
These Boolean features are formed due to associated Technological Results, the technological information of the initial Hole features defined in the component size, thread. Tooling Component Structure Basics: Sketcher option Snap to point if also taken into account.
Parameters Specification Tree Node Name: Sketch point Or you can also work in the 3D viewer and use the green arrows displayed in the viewer for translation or the green half-circle for rotation.
Managing User Components You will see how any User Component is structured, and how to create and instantiate user-defined components. You can also use the Compass to dynamically move the Molded Part in order to ensure that the Parting Surface will fully split Core and Cavity plates, or to define precise location values.
Based on additional information defined inside the Acvity, the user will be guided in catai selection of positioning axes when instantiating the Component.
Core & Cavity Design
The mold base is created. Set the other ccavity of the gate: It will contain the location as Point name Gate. Editing the position of one instance via fields Instance Origin or using the green arrows in the preview applies to the selected instance only.